-
Get in Touch
-
Newsletter
A: Tiles are flat, thin pieces of material used to cover floors, walls, and other surfaces.
A: Tiles can be made of a variety of materials, including ceramic, porcelain, natural stone, glass, and mosaic.
A: Ceramic tiles are made from clay and other natural materials, while porcelain tiles are made from a type of clay that is fired at a higher temperature, making them denser and more durable.
A: Natural stone tiles are made from quarried stone, while engineered stone tiles are made from a mixture of natural stone and other materials, such as resin.
A: Ceramic and porcelain tiles are popular choices for bathroom walls and floors due to their durability and resistance to moisture.
A: Ceramic and porcelain tiles are also popular choices for kitchen floors and backsplashes due to their durability and ease of cleaning.
A: Yes, some types of tiles, such as natural stone and porcelain, can be used for outdoor patios, walkways, and other spaces.
A: Yes, some types of tiles, such as porcelain and natural stone, can be used for kitchen and bathroom countertops.
A: Yes, some types of tiles, such as ceramic and porcelain, can be used for shower floors.
A: Yes, some types of tiles, such as natural stone and porcelain, can be used for fireplace surrounds.
A: Yes, tiles can be installed over concrete as long as the surface is properly prepared and level.
A: Yes, tiles can be installed over plywood as long as the surface is properly prepared and level.
A: It is not recommended to install tiles over vinyl flooring, as the vinyl may contain asbestos and could cause health hazards if disturbed.
A: Yes, tiles can be installed over existing tiles as long as the surface is properly prepared and level.
A: Yes, tiles can be cut to fit around corners and other obstacles using a tile cutter or wet saw.
A: Measure the length and width of the area to be tiled, and multiply those numbers to get the square footage. Add 10-15% extra to account for cuts and waste.
A: Choose a grout that is appropriate for the size and type of tiles being used, and consider factors such as color, durability, and ease of cleaning.
A: Choose an adhesive that is appropriate for the type of tiles being used and the surface they will be installed on.
A: The surface should be clean, level, and free from debris and any previous adhesive residue.
A: To install tiles, you will need a few basic tools, including a tile cutter or saw, a trowel, a level, a measuring tape, a chalk line, and a rubber mallet. You may also need a notched trowel, a grout float, and a tile spacer.
A: The materials you need for tile installation will depend on the type of tile and the substrate. In general, you will need tile adhesive, grout, and sealant. You may also need a primer or a waterproofing membrane, depending on the substrate and the location of the installation.
A: Before installing tiles, you need to prepare the substrate. The substrate should be clean, dry, and level. If the substrate is uneven, you may need to use a self-leveling compound to even it out.
A: The layout of the tiles will depend on the pattern you choose. You can lay tiles in a straight pattern, a diagonal pattern, or a herringbone pattern, among others. Use a chalk line to mark the center of the room or the area where you will be installing the tiles. Then, dry lay the tiles to determine the best pattern and layout.
A: To cut the tiles, use a tile cutter or saw. Measure the tile and mark the cut line with a pencil. Then, place the tile on the cutter or saw and score the surface of the tile along the cut line. Use the tile cutter or saw to cut the tile along the score line.
A: To install the tiles, spread the tile adhesive over a small area of the substrate using a notched trowel. Place the first tile in the adhesive and press it down firmly. Use tile spacers to ensure even spacing between the tiles. Continue installing tiles in small sections, working your way out from the center of the room or the area where you are installing the tiles.
A: Once the adhesive has set, you can grout the tiles. Mix the grout according to the manufacturer's instructions and spread it over the tiles using a grout float. Use a rubber float to push the grout into the gaps between the tiles. Wipe off any excess grout with a damp sponge. Allow the grout to dry according to the manufacturer's instructions.
A: To finish the edges of the tiles, you can use tile edging or bullnose tiles. Tile edging is a strip of metal or plastic that covers the edge of the tile. Bullnose tiles are tiles with a rounded edge. Install the edging or bullnose tiles using tile adhesive and grout.
A: After installation, it is important to maintain the tiles to keep them looking their best. Regular cleaning and sealing will help to protect the tiles from damage and staining. Follow the manufacturer's instructions for cleaning and sealing your particular type of tile.
